Concrete Repair Solution

Concrete Crack Injection Solutions for Structural Repair and Waterproofing

Professional concrete crack injection systems designed to seal leaking cracks, restore concrete performance, and extend the service life of structures with epoxy, polyurethane, and chemical injection technologies.

Crack Identification

Common Concrete Crack Problems

Understanding different crack conditions helps determine the most suitable concrete crack injection system.

Structural Cracks in Concrete

Structural Cracks in Concrete

Cracks caused by structural movement, loading stress, settlement, or long-term deterioration may affect concrete strength and durability.

Shrinkage and Surface Cracks

Shrinkage and Surface Cracks

Small cracks caused by concrete curing, temperature changes, and shrinkage can allow moisture penetration over time.

Water Leakage Through Concrete Cracks

Water Leakage Through Cracks

Active water leakage requires injection solutions that can penetrate cracks and seal internal leakage paths.

Joint Leakage

Joint and Connection Cracks

Weak points around construction joints and connections may become pathways for water and contaminants.

Honeycombs Voids in Concrete

Honeycomb and Internal Voids

Internal concrete defects and voids can reduce durability and require targeted injection reinforcement.

Repeated Leakage After Surface Repairs

Repeated Crack Failure After Surface Repair

Surface patching may fail when internal cracks, movement, or hidden leakage paths remain untreated.

Material Selection Logic

Crack Types and Recommended Injection Solutions

Different crack conditions require different injection materials. Selecting the correct grout system is essential for effective repair, waterproofing, and structural protection.

01

Active Water Leakage Cracks

Problem:
Water is actively flowing through concrete cracks and requires rapid sealing.

Recommended Injection System

Hydrophilic Polyurethane Grout
Hydrophobic Polyurethane Grout
Fast Reaction PU Injection Grout

Suitable for: Basements, concrete walls, underground structures and leaking joints.

03

Structural Concrete Cracks

Problem:
Cracks affect concrete integrity and require internal reinforcement.

Recommended Injection System

Epoxy Resin Injection Grout
High Bond Strength Repair System

Suitable for: Concrete beams, columns, walls and structural components.

02

Fine Cracks and Micro Leakage Paths

Problem:
Small cracks and hidden leakage channels require deep penetration

Recommended Injection System

Acrylate Injection Grout
Microcrystalline Polyurea Injection Grout

Suitable for: Fine cracks, concrete pores, and complex leakage paths.

04

Moving Cracks and Expansion Areas

Problem:
Cracks caused by movement require flexible sealing performance.

Recommended Injection System

Flexible Polyurethane Grout
Polyurea Grout
Microcrystalline Polyurea Injection Grout

Suitable for: Expansion joints, construction joints and moving cracks.

System Selection Logic

How to Select the Right Crack Injection System?

Choosing the correct injection system depends on crack condition, water activity, repair objectives, and long-term performance requirements.

01

Identify Crack Condition

Understand crack characteristics before selecting an injection method.

  • Dry structural cracks
  • Active water leakage cracks
  • Fine cracks and micro cracks
  • Moving cracks
02

Evaluate Water Activity

Water conditions influence the selection of injection materials and repair methods.

  • Dry conditions
  • Damp concrete
  • Active water flow
03

Define Repair Objective

Determine whether the main goal is sealing, reinforcement, or flexible protection.

  • Water stopping
  • Waterproof sealing
  • Structural bonding
  • Long-term crack protection
04

Select Suitable Injection System

Choose the appropriate injection technology according to project requirements.

  • Polyurethane injection system
  • Epoxy injection system
  • Acrylate injection system
  • Polyurea grout system
  • Advanced flexible injection systems

Need Help Selecting a Crack Injection System?

Share your crack condition, water situation, and project requirements. Hongru can recommend suitable injection materials and repair solutions.

Injection Material Options

Concrete Crack Injection Materials

Different concrete crack conditions require different injection grout materials. Hongru provides polyurethane grout, epoxy injection resin, acrylate grout, polyurea grout, microcrystalline polyurea grout, and foaming injection grout for crack repair, leakage sealing, structural reinforcement, and flexible waterproofing applications.

Polyurethane Injection Grout
Flexible Water Sealing

Polyurethane Injection Grout

Polyurethane injection grout is commonly used for sealing leaking concrete cracks, damp cracks, construction joints, and water-bearing leakage paths. It reacts with moisture and helps form a flexible sealing barrier inside cracks.

Suitable for:

Active leakage cracks, wet cracks, construction joints, concrete wall leakage, and waterproof crack repair.

Epoxy Injection Resin
Structural Crack Repair

Epoxy Injection Resin

Epoxy injection resin is selected when the repair objective is bonding and structural reinforcement. It is suitable for dry or stable concrete cracks where strength restoration and rigid crack repair are required.

Suitable for:

Dry structural cracks, concrete beams, slabs, walls, columns, and cracks requiring high bonding strength.

Acrylate Grout
Fine Crack Penetration

Acrylate Grout

Acrylate grout can be considered for fine cracks, micro leakage paths, and complex water channels where low-viscosity penetration and flexible sealing performance are required.

Suitable for:

Fine cracks, micro cracks, complex leakage paths, damp concrete areas, and narrow crack injection repair.

Polyurea Injection Grout
High-performance Flexible Sealing

Polyurea Injection Grout

Polyurea injection grout is used as an advanced flexible injection material for demanding waterproofing and crack sealing conditions. It may be considered where fast reaction, elasticity, adhesion, and durability are important.

Suitable for:

Demanding crack waterproofing, flexible sealing, construction crack, concrete leakage repair, and selected high-performance injection projects.

Microcrystalline Polyurea Grout
Specialized Crack Sealing

Microcrystalline Polyurea Grout

Microcrystalline polyurea grout is a specialized injection technology for selected crack sealing and waterproofing applications. It can support fine crack filling, flexible sealing, and long-term leakage control under complex conditions.

Suitable for:

Fine crack sealing, complex leakage channels, waterproof crack repair, and special concrete injection requirements.

Foaming Injection Grout
Foaming and Void Filling

Foaming Injection Grout

Foaming injection grout is used when water leakage, void filling, and rapid expansion are required. It helps fill gaps, block leakage channels, and support fast sealing in water-bearing crack conditions.

Suitable for:

Active water leakage, larger leakage paths, voids behind cracks, honeycomb defects, and emergency sealing support.

Material selection should be based on crack condition

The right concrete crack injection material depends on crack width, water activity, repair objective, structural requirement, movement condition, and long-term waterproofing expectations. Hongru can help contractors and distributors select suitable injection grout systems based on project photos, videos, drawings, and repair requirements.

Injection Procedure

Concrete Crack Injection Process

A professional crack injection repair process combines condition assessment, suitable material selection, controlled injection, and final verification to achieve reliable repair performance.

Crack Inspection and Condition Assessment

The first step is identifying crack characteristics, including crack width, depth, movement condition, and water activity.

Crack Type

Water Condition

Repair Objective

Injection System Planning

Based on the crack condition, engineers determine suitable injection materials, injection points, and repair methods.

Material Selection

Injection Layout

Repair Strategy

Injection Packer Installation

Injection ports are installed along the crack path to allow controlled delivery of grout materials into internal crack channels.

Packer Installation

Crack Preparation

Controlled Grout Injection

Selected injection grout is introduced under controlled pressure to penetrate cracks, seal leakage paths, or restore structural bonding.

PU Injection

Epoxy Injection

Chemical Grouting

Repair Verification and Surface Treatment

After injection, the repaired area is checked to confirm sealing effectiveness, bonding performance, and final surface condition.

Performance Check

Leakage Control

WHY Hongru

Why Choose Hongru for Concrete Crack Injection Solutions?

Hongru combines injection material manufacturing expertise with engineering support to help partners select suitable crack repair systems for different concrete conditions.

01

Crack Repair Material Expertise

Hongru develops and manufactures different injection grout technologies designed for various concrete crack conditions, including leakage sealing, structural repair, and flexible crack protection.

02

Multiple Injection Technologies

From polyurethane injection grout and epoxy resin injection to acrylate, polyurea, and specialized grout systems, Hongru provides multiple material options for different repair requirements.

03

Condition-Based Material Selection

Concrete cracks vary by water condition, crack movement, and repair objectives. Hongru supports customers in selecting suitable injection materials based on actual project conditions.

04

Reliable Manufacturing Quality

As a direct injection material manufacturer, Hongru maintains controlled production processes and quality inspection procedures to support stable material performance.

05

OEM and Bulk Supply Support

Hongru supports distributors and project suppliers with customized packaging, private label production, and stable bulk supply solutions.

06

Technical Documentation Support

Hongru provides technical information, product documentation, and application guidance to help partners communicate solutions with their customers.

FAQs

Frequently Asked Questions About Concrete Crack Injection Solutions

Find answers to common questions about concrete crack repair, injection materials, system selection, and project requirements.

1. What is concrete crack injection?

Concrete crack injection is a repair method that introduces specialized grout materials into cracks within concrete structures to seal leakage paths, restore bonding, or improve long-term protection performance.

2. Which injection grout is suitable for leaking concrete cracks?

For active water leakage cracks, polyurethane injection grout is commonly selected because of its flexible sealing ability and compatibility with wet conditions. The final material selection depends on crack condition, water pressure, and repair objectives.

3. What is the difference between epoxy injection and polyurethane injection?

Epoxy injection resin is generally selected for dry and stable structural cracks where strong bonding and reinforcement are required. Polyurethane injection grout is commonly used for waterproof crack sealing, especially where moisture or active leakage exists.

4. Can concrete crack injection repair active water leakage?

Yes. Injection systems are widely used for repairing leaking concrete cracks. The suitable grout type depends on leakage conditions, crack movement, and the required waterproofing performance.

5. How do l choose the right concrete crack injection system?

The correct injection system should be selected according to crack width, crack movement, water activity, structural requirements, and expected service performance. Professional assessment helps avoid selecting unsuitable materials.

6. What types of injection materials does Hongru provide?

Hongru provides multiple injection material technologies, including polyurethane injection grout, epoxy injection resin, acrylate grout, polyurea grout, microcrystalline polyurea grout, and foaming injection grout for different concrete repair requirements.

7. Can Hongru support OEM and bulk injection grout supply?

Yes. Hongru supports distributors, wholesalers, and project suppliers with OEM packaging, private label manufacturing, and bulk supply solutions based on market and project requirements.

8. What information should l provide for a crack injection recommendation?

To recommend a suitable injection system, customers can provide crack photos, leakage conditions, structure type, project location, repair requirements, and expected performance goals.

CONTACT Hongru

Need a Concrete Crack Injection Solution?

Share your crack condition, leakage situation, and project requirements with Hongru. Our team can recommend suitable injection materials and repair systems for your concrete repair projects.