MINING · ROCK FISSURE · CURTAIN GROUTING SOLUTIONS

Mining & Curtain Grouting Solutions

Grouting solutions for mine water control, fractured rock sealing, underground seepage cutoff, grout curtain applications, void filling, and reinforcement requirements.

Hongru supports buyers, mining contractors, engineering companies, distributors, and project suppliers with grout material selection, product supply, customized formulation, OEM/ODM, and application-driven material development for mining and underground grouting requirements.

MINING GROUTING APPLICATIONS
Different groundwater and rock conditions require different grouting objectives.
01
Mine Water Ingress

Groundwater entering shafts, drifts, workings, or underground openings.

02
Water-bearing Rock Fissures

Water movement through fractured rock, joints, fissures, and connected pathways.

03
Fractured or Permeable Zones

Rock masses or underground zones requiring seepage reduction, filling, or reinforcement.

04
Grout Curtain & Seepage Cutoff

Regional groundwater control where a broader low-permeability barrier is required.

SELECTION PRINCIPLE

Define the groundwater problem and grouting objective first. Material selection comes after the required function is clear.

MATERIAL SELECTION LOGIC

Identify the Mining or Groundwater Problem Before Selecting the Grout

In mining and curtain grouting projects, the visible leakage point is only part of the picture. Before discussing material selection, it is more important to understand how water moves through the rock mass, whether the issue is local or regional, and what the real grouting objective should be.

WHY THIS STEP MATTERS

Not every underground water problem should be treated the same way.

A local leakage point may only require targeted injection, while a broader water-bearing zone may require permeability reduction or even curtain grouting.

01  Where is the water entering?

02  Is the pathway isolated or connected?

03  Is the problem local, zonal, or regional?

04  Is the goal sealing, cutoff, filling, or reinforcement?

01

Mine Water Ingress

Groundwater enters mine workings, tunnels, drifts, galleries, or excavation areas through cracks, joints, construction interfaces, or connected water-bearing paths.

Key check: inflow point, water activity, pressure condition, and water concentration

02

Water-bearing Rock Fissures

Water moves through natural rock fissures, joints, or fractured rock pathways. These may be visible in one point, but often extend much further than the first wet area suggests.

Key check: fissure width, continuity, penetration path, and leakage pattern

03

Fractured or Permeable Rock Zones

Some projects involve a wider fractured or permeable zone rather than a single leakage path. In these cases, the problem is often about groundwater transmission through a broader underground area.

Key check: fracture density, permeability level, connected voids, and zone extent

04

Shaft & Underground Opening Water Control

Water may enter around shaft walls, underground openings, access areas, interfaces, or surrounding rock. These locations often require targeted analysis because geometry and accessibility affect the repair logic.

Key check: opening geometry, leakage position, surrounding rock condition, and access

05

Regional Seepage & Curtain Cutoff

When water moves through multiple connected fissures or permeable zones, the issue may no longer be a single-point leak. In these conditions, the project may require regional seepage control or curtain grouting.

Key check: affected extent, connected seepage routes, barrier need, and cutoff objective

SELECTION PRINCIPLE

Define the groundwater problem first. Material selection comes after the required function is clear.

Because mine water control, fissure sealing, permeability reduction, curtain formation, and reinforcement are not the same task.

DEFINE THE GROUTING OBJECTIVE

What Does the Grouting Need to Achieve?

Once the groundwater and rock condition is understood, the next step is to define the actual grouting objective. Water cut-off, fissure sealing, permeability reduction, curtain formation, void filling, and reinforcement are related tasks, but they are not the same engineering requirement.

START WITH THE REQUIRED FUNCTION

Do not choose the grout only by where the water appears.

The visible leakage point may be only one part of a larger fissure network, permeable zone, or groundwater pathway. The material direction should follow what the grout must accomplish underground.

01
Control active water?

Reduce or stop groundwater entering the working area.

02
Seal a defined fissure?

Treat one or several connected water-bearing rock paths.

03
Reduce permeability across a zone?

Limit groundwater movement through a wider fractured area.

04
Create a cutoff barrier?

Form a broader grouted zone for regional seepage control.

01

HYDRAULIC CONTROL

Water Cut-off

Reduce or stop groundwater entering mine workings, shafts, underground openings, or excavation areas through active fissures, joints, interfaces, or water-bearing pathways.

KEY CONSIDERATIONS

Water activity
Pressure condition
Required control speed

02

TARGETED SEALING

Rock Fissure Sealing

Fill and seal individual or connected rock fissures that act as preferential routes for groundwater movement through the surrounding rock mass.

KEY CONSIDERATIONS

Fissure aperture
Connectivity
Required penetration

03

ZONE TREATMENT

Permeability Reduction

Reduce groundwater movement through a fractured or permeable rock zone where the problem extends beyond one visible leakage point or fissure.

KEY CONSIDERATIONS

Distribution
Connected pathways
Treated zone extent

04

REGIONAL CUTOFF

Curtain Formation

Create a broader low-permeability grouted zone where groundwater needs to be intercepted, redirected, or reduced across a larger underground area.

KEY CONSIDERATIONS

Barrier continuity
Coverage
Permeability reduction

ADDITIONAL PROJECT OBJECTIVES
Some projects require more than water control alone.

Void treatment and reinforcement may become part of the same grouting decision when cavities, loosened zones, fractured ground, or weakened rock are present.

05

Void Filling

Fill cavities, larger openings, loosened zones, or water-bearing voids where volume occupation is required in addition to sealing.

Focus: filling capacity · expansion behavior · volume stability

06

Rock or Ground Reinforcement

Improve the integrity of fractured or weakened zones where the project also requires bonding, strength development, or stabilization.

Focus: bonding · strength · load transfer · stability

LOCAL TREATMENT VS. REGIONAL CUTOFF

Local Injection or Curtain Grouting?

A visible water entry point does not always represent the full groundwater problem. Localized fissures can often be treated around a defined pathway, while broader or connected seepage zones may require permeability reduction across a larger rock mass.

TARGETED TREATMENT

Local Injection

Local injection concentrates grout around a defined fissure, leakage path, interface, cavity, or limited fractured zone where the treatment area can be reasonably identified.

Typical conditions

Isolated water-bearing fissures · localized shaft leakage · individual joints · defined cavities · limited fractured areas

Primary objective

Seal, fill, reinforce, or control water around a specific underground pathway.

Decision focus

Fissure geometry · injection access · material penetration · local groundwater condition

grouting

REGIONAL GROUNDWATER CONTROL

Curtain Grouting

Curtain grouting treats a wider rock or ground zone to reduce permeability and form a more continuous groundwater cutoff where seepage cannot be traced to one isolated path.

Typical conditions

Connected fracture networks · permeable rock zones · multiple water paths · mine perimeter cutoff · regional groundwater interception

Primary objective

Reduce groundwater transmission across a broader zone and establish a cutoff barrier.

Decision focus

Barrier continuity · treated extent · permeability reduction · grout distribution

ENGINEERING DISTINCTION
A local leak does not automatically require a grout curtain.

When the water pathway is concentrated and identifiable, targeted injection may provide the required treatment. When groundwater moves through multiple connected fissures or a wider permeable zone, treating only the visible leakage point may leave the surrounding seepage network unchanged.

ASSESS BEFORE MATERIAL SELECTION
Four questions help separate a local treatment from a regional cutoff problem.

01

Can the main water pathway be clearly identified?

02

Are multiple fissures hydraulically connected?

03

Is groundwater moving through a wider permeable rock zone?

04

Does the project require local sealing or broader groundwater interception?

MATERIAL SELECTION BY FUNCTION

Match the Grout Material to the Required Underground Function

Grout selection should follow the required underground function, groundwater condition, fissure or void geometry, penetration demand, reaction behavior, and reinforcement objective. Different treatment zones within the same mining or curtain grouting project may require different grout materials.

SELECTION PRINCIPLE
Select the grout by required material behavior.

Rapid water cut-off, deep fissure penetration, flexible sealing, cavity filling, structural bonding, reinforcement, and regional permeability reduction are different engineering objectives. A material that performs well for one function should not automatically be applied to another.

Required Function
Hongru Material Direction
Why It May Fit
Important Boundary
01 · WATER CONTROL

Rapid Mine-water Cut-off

2K Fast-reacting Hydrophobic Foaming Polyurethane Grout Selected 1K Hydrophobic Polyurethane Grout
Fast reaction and water-reactive expansion can help control active inflow and fill connected leakage paths or water-bearing openings.
Fast reaction is not automatically suitable where deep penetration through very fine fissures is the primary objective.
02 · WET SEALING

Flexible Sealing in Wet Conditions

1K Hydrophilic Polyurethane Grout Acrylate Injection Grout
These materials can be considered where water compatibility, flexible sealing, and treatment of wet or distributed seepage pathways are important.
They should not automatically replace fast hydrophobic polyurethane where severe active inflow requires rapid first-stage water control.
03 · PENETRATION

Fine Fissure & Permeation Grouting

Acrylate Injection Grout Strength-oriented or high-elongation formulations can be customized
Low-viscosity material can penetrate fine fissures, connected micro-pathways, and permeable zones where distribution is more important than large-volume expansion.
Acrylate should not be treated as the primary emergency material for sudden severe high-volume water inflow.
04 · STRUCTURAL BONDING

Stable Crack & Interface Bonding

Epoxy Injection Resin Available in 1:1 · 1:2 · 1:4 systems
Epoxy resin is more suitable where bonding, strength development, and structural connection across stable cracks or interfaces are important.
Epoxy is not the primary direction for severe active water, highly mobile fissures, or large-volume permeable-zone treatment.
05 · CAVITY TREATMENT

Void Filling & Cavity Treatment

Polyurethane Foaming Grout Polymer Foaming Materials Cementitious Grout for suitable large-volume bulk filling
Fast-expanding polymer materials can be used for localized cavities, loosened zones, and openings where rapid filling or volume expansion is required. For large-volume bulk filling, cementitious grout may be more appropriate where volume and cost efficiency become major project factors.
Material selection should consider cavity size, groundwater condition, required strength, heat generation, filling volume, and whether the objective is filling, sealing, or reinforcement.
06 · REINFORCEMENT

Rock & Ground Reinforcement

High-strength Polymer Reinforcement Material Selected Epoxy or High-strength Grouting Materials
These materials can be used where the treatment objective includes bonding, strength development, consolidation, or stabilization of weakened and fractured zones.
Reinforcement materials should be matched to ground condition, load requirement, void geometry, substrate condition, and project design.
07 · MOVEMENT TOLERANCE

Elastic Sealing for Moving Fissures or Joints

Polyurea Grout Microcrystalline Polyurea Grout
High-elasticity grouting materials can be considered where the repaired fissure or joint must tolerate movement after injection.
Polyurea and microcrystalline polyurea grout should not be positioned as primary emergency materials for sudden severe high-flow leakage.
08 · CURTAIN / REGIONAL TREATMENT

Regional Permeability Reduction & Curtain Grouting

Cementitious Grouting Materials Acrylate Injection Grout Selected chemical grouts for finer fissures or targeted water-bearing zones
Cementitious grout can be used for conventional or larger-volume curtain treatment, while acrylate and other chemical grouts can address finer fissures, connected seepage paths, or penetration requirements that cannot be effectively treated by larger-particle grout.
A curtain may pass through different geological zones. The same grout material should not automatically be used across the entire treatment area.
MULTI-MATERIAL GROUTING

One mining project may require more than one grout material.

A project may use one grout to control active water, another to penetrate fine fissures, and a different material for cavity filling or reinforcement. Each treatment zone should be matched to its own groundwater condition, geometry, and required material function.

HONGRU CUSTOM MATERIAL CAPABILITY

Formulation can be adjusted to specific project or market requirements.

Viscosity Reaction Time Foaming Behavior Strength Elongation Color Packaging Application-specific Formulation
GROUT DISTRIBUTION IN FRACTURED ROCK

What Controls Grout Distribution in Rock?

Grout does not spread through fractured rock in a uniform way. Distribution depends on fissure geometry, connectivity, groundwater conditions, material properties, and the pressure available to move the grout through the treatment zone.

CORE ENGINEERING PRINCIPLE
Grout penetration is controlled by the relationship between the rock pathway and the behavior of the material being injected.

A low-viscosity grout may move effectively through narrow connected fissures, while a faster-reacting or expanding material may be better suited to water cut-off or larger openings. The required penetration distance and the available flow path must therefore be considered together.

01

PATHWAY SIZE

Fissure Aperture

Narrow fissures restrict the movement of higher-viscosity or particle-containing grout, while wider openings provide more space for material flow, expansion, or volume filling.

WHY IT MATTERS

Smaller openings generally require stronger penetration capability and tighter control of viscosity and reaction behavior.

02

FLOW NETWORK

Fissure Connectivity

A single visible crack may connect to multiple hidden fractures, joints, or voids. Connected pathways can spread grout over a much larger area than the original injection point suggests.

WHY IT MATTERS

Distribution depends not only on fissure width, but also on where the connected network leads and how easily grout can move through it.

03

GROUND CONDITION

Rock Permeability & Fracture Density

Highly fractured or permeable rock can contain many potential grout paths, while tighter rock may concentrate injection into only a few accessible fissures.

WHY IT MATTERS

A broader permeable zone may require greater grout distribution than a localized fissure treatment.

04

GROUNDWATER

Water Pressure & Flow Direction

Moving or pressurized groundwater can influence grout travel, dilute or displace some materials, and change the direction in which the injected grout distributes.

WHY IT MATTERS

Groundwater behavior must be considered together with reaction speed, sealing requirement, and the required penetration distance.

05

MATERIAL BEHAVIOR

Viscosity & Reaction Time

Lower viscosity generally supports movement through finer pathways, while reaction time determines how long the material remains mobile before gelation, curing, foaming, or other reaction limits further travel.

WHY IT MATTERS

A material that reacts too early may stop before reaching the required treatment distance, while excessively slow reaction may not provide the required water-control response.

06

INJECTION ENERGY

Injection Pressure

Injection pressure provides the driving force needed to move grout into available fissures and permeable pathways, but it must remain compatible with the ground, opening geometry, and project design.

WHY IT MATTERS

More pressure does not automatically mean better distribution. Pressure must be matched to material behavior and the condition of the surrounding rock mass.

VARIABLES WORK TOGETHER

No single parameter determines grout penetration.

Rock Pathway

Aperture · connectivity · permeability

Groundwater Condition

Pressure · flow · saturation

Material Behavior

Viscosity · reaction · expansion

Injection Response

Penetration · distribution · filling

PRACTICAL MATERIAL DECISION

Material properties may need to be adjusted when the required grout path changes.

For projects requiring deeper penetration, faster water cut-off, greater expansion, higher strength, or more flexibility, grout formulation can be adjusted to better match the target fissure network and treatment objective.

MINING GROUTING DECISION WORKFLOW

From Ground Condition to Grout Material Decision

A reliable material decision should connect groundwater behavior, rock condition, treatment objective, grout properties, and injection requirements. These factors should be reviewed together rather than selecting a material from one visible leakage point or one product parameter.

DECISION LOGIC

Each project decision should answer a different technical question.

01
ASSESS

Confirm the Groundwater Problem

Review where water is entering, whether flow is active or pressurized, how large the affected area is, and whether the visible leakage point represents a localized or broader groundwater problem.

REVIEW

Water source · inflow condition · pressure · affected extent

DECISION OUTPUT

Defined groundwater condition

02
CHARACTERIZE

Understand the Rock and Grout Pathway

Determine whether grout must move through a defined fissure, connected fracture network, permeable rock zone, cavity, loosened ground, or a combination of different underground pathways.

REVIEW

Aperture · connectivity · permeability · void geometry

DECISION OUTPUT

Likely grout distribution path

03
DEFINE

Define the Required Grouting Function

Confirm whether the treatment is intended for rapid water cut-off, fissure sealing, permeability reduction, curtain formation, cavity filling, reinforcement, or a combination of these functions.

REVIEW

Primary objective · secondary objective · treatment extent

DECISION OUTPUT

Clear grouting objective

04
MATCH

Match the Material Behavior to the Required Function

Compare suitable grout families according to viscosity, reaction time, foaming or expansion behavior, flexibility, strength, bonding, penetration demand, and groundwater compatibility.

REVIEW

Viscosity · reaction · expansion · elasticity · strength

DECISION OUTPUT

Selected material direction

05
COMPATIBILITY

Confirm the Injection Approach and Material Compatibility

Check whether the selected material is compatible with the intended injection method, available equipment, packers, boreholes, expected penetration distance, treatment volume, and site access conditions.

REVIEW

Pump · packer · borehole · injection access · treatment volume

DECISION OUTPUT

Material and injection compatibility

06
VERIFY

GROUNDWATER

Review the Result Against the Treatment Objective

Evaluate whether groundwater control, grout distribution, cavity treatment, reinforcement, or permeability reduction has achieved the intended result, and identify any remaining treatment requirements.

REVIEW

Water response · grout distribution · remaining pathways · follow-up need

DECISION OUTPUT

Follow-up requirement confirmed

PROJECT-SPECIFIC DECISION

The same grout material should not be applied mechanically across every treatment zone.

Mining and curtain grouting projects may contain different fissure sizes, groundwater conditions, voids, and reinforcement requirements within the same site. Material selection and formulation can therefore change between treatment zones.

HONGRU MATERIAL & PROJECT SUPPORT

From Grout Material Selection to Custom Supply

Hongru supports mining contractors, engineering companies, distributors, importers, and project suppliers with grout material selection, product supply, customized formulation, OEM/ODM, and project-specific material development.

Hongru technical team reviewing injection grout requirements
HONGRU CAPABILITY
Multi-material grouting supply with formulation adjustment and reverse-development support.
01

PROJECT REQUIREMENTS

Project & Application Review

Share groundwater conditions, rock or fissure information, treatment objectives, existing specifications, photos, videos, or other available project information for material discussion.

02

MATERIAL DIRECTION

Multi-material Grout Selection

Hongru can compare polyurethane, acrylate, epoxy, polymer reinforcement, polymer foaming, polyurea, microcrystalline polyurea, cementitious grout, and other suitable material directions according to the required function.

03

COMMERCIAL SUPPLY

Product Supply for Projects

Product specifications, packaging, order quantity, technical documents, commercial requirements, and supply arrangements can be discussed according to the purchasing plan and target market.

04

OEM / ODM

Private-label & Market-specific Supply

Packaging, labels, branding, product identification, and selected product characteristics can be adjusted for distributors, importers, wholesalers, and private-label customers.

05

CUSTOM FORMULATION

Adjust Material Properties to the Required Application

Depending on the grout family and technical target, formulation parameters such as viscosity, reaction time, foaming behavior, strength, elongation, color, and other application-related properties can be discussed and adjusted.

06

REVERSE DEVELOPMENT

Customer Sample-based Material Development

Customers can provide an existing grout sample or target product for review. Hongru can support reverse development and formulation matching according to the sample characteristics, target application, and confirmed technical requirements.

ADJUSTABLE MATERIAL PARAMETERS

Grout formulation can be matched more closely to project or market requirements.

Viscosity

Penetration and flow behavior

Reaction Time

Fast or controlled reaction

Foaming Behavior

Expansion and filling response

Elongation

Application-specific mechanical requirement

Viscosity

Flexible or movement-tolerant formulations

Packaging

OEM, ODM and market-specific presentation

Hongru Support Scope

Hongru provides injection grouting materials, material-selection support, product supply, OEM/ODM, customized formulation, reverse-development support, and technical communication. Final engineering design, injection parameters, and on-site execution should be confirmed according to actual project conditions by the responsible project team.

MINING & CURTAIN GROUTING FAQ

Frequently Asked Questions

Common questions about grout material selection, curtain grouting, mine-water control, and customized grouting materials.

What is the difference between local injection and curtain grouting?

Local injection targets a defined fissure, leakage path, cavity, or limited fractured zone. Curtain grouting treats a broader rock or ground area where multiple connected seepage pathways require regional permeability reduction or groundwater cutoff.

Which grout is suitable for water-bearing rock fissures?

The choice depends on fissure width, groundwater activity, pressure, penetration distance, and treatment objective. Hydrophobic polyurethane may be used for active water control, hydrophilic polyurethane for flexible sealing in wet conditions, and acrylate grout where fine-fissure penetration or distributed sealing is required.

Is cementitious grout still used for curtain grouting?

Yes. Cementitious grout is widely used for conventional and larger-volume curtain treatment. Chemical grouts may be selected for finer fissures, active water, flexible sealing, or penetration requirements that need different material behavior.

Can different grout materials be used in the same mining project?

Yes. Different treatment zones may require different functions such as rapid water cut-off, fine-fissure penetration, cavity filling, flexible sealing, or reinforcement. One grout material does not have to be used across every underground condition.

Can Hongru customize grout properties for a specific project?

Yes. Depending on the grout family and technical target, Hongru can discuss adjustments to viscosity, reaction time, foaming behavior, strength, elongation, color, packaging, and other application-related properties.

Can Hongru develop a grout based on a customer-provided sample?

Yes. Customers can provide an existing material sample or target product. Hongru can support reverse development and formulation matching according to the sample characteristics, target performance, application requirements, and confirmed technical parameters.

MINING & CURTAIN GROUTING INQUIRY

Need a Grout Material Recommendation for Your Project?

Send Hongru the project information you already have. We can discuss suitable grout material directions, technical requirements, customized formulation, product supply, OEM/ODM, or sample-based reverse development according to your application and purchasing plan.

WHAT YOU CAN SEND

01
Project or application description
02
Groundwater, fissure, rock, cavity, or reinforcement condition
03
Target material properties or technical requirements
04
Existing product specification or reference sample
05
OEM / ODM, packaging, labeling, or branding requirements
06
Expected quantity and purchasing plan

Grout Material Selection

Product Supply

Custom Formulation

OEM / ODM

Reverse Development

Technical Communication

Hongru provides grouting materials, material-selection support, product supply, customized formulation, OEM/ODM, reverse-development support, and technical communication. Final engineering design, injection parameters, and on-site execution should be confirmed according to actual project and geological conditions by the responsible project team.